Marble Sort Level 607 — Walkthrough and Solution

Marble Sort Level 607 presents a tricky layout where the Top Tray is heavily weighted to the left, with a large empty area on the right except for one isolated column. The board features two Panels, each marked with a '3', that block critical colors until you clear three bottom Boxes. The key is to focus exclusively on the available colors and resist the urge to tap the dangerous left column early.

The Top Tray has a dense cluster of marbles on the left, forming a five-column grid, while the right side is mostly empty with a single purple marble perched above a dark blue block in the far corner. The two Panels are positioned: one in the middle of the left block (third column, second row), and another on the top right edge. Both require clearing three Boxes to shatter. Initially, the bottom Boxes from left to right are Orange, Bright Green, Dark Red, and Light Blue. Bright Greens are near the top left, Dark Reds in the top middle, and Oranges are on the left edge and middle right. The leftmost column holds a dangerous sequence: Green, Pink, Purple, Orange, Pink, which if tapped early will flood your Conveyor Belt with unusable Pink and Purple marbles.

Marble Sort Level 607 Walkthrough

The active bottom Boxes at the start are Orange, Bright Green, Dark Red, and Light Blue. You must clear three of these to break the Panels.

The primary trap is the left column: it contains Pink and Purple marbles that have no matching bottom Box initially, so tapping it will clog your Conveyor Belt. Avoid that column until later.

How to Beat Marble Sort Level 607 — Step-by-Step

Phase one: Clear the initial Boxes

1. Tap the Light Blue marbles from the second column and middle area to clear the far-right Light Blue Box.
2. Route the Dark Red marbles from the top middle into the Dark Red Box.
3. Feed the Bright Green cluster near the top left into the Bright Green Box.
4. Do not touch the far-left column; leave the Pink and Purple marbles there.
5. Once three Boxes are cleared, both Panels will break.

Phase two: Handle the revealed colors

1. After the Panels break, the left Panel reveals a Dark Green block, and the top-right Panel exposes Yellow marbles and a Dark Red block.
2. New bottom Boxes appear: Light Blue, White, Dark Green, and Yellow.
3. Drop the Yellow marbles from the top right into the active Yellow Box.
4. Release the Dark Green block into the Dark Green Box.
5. Flush any remaining Light Blue marbles into the secondary Light Blue Boxes on the left.

Phase three: Final cleanup

1. Wait for the Dark Blue Box to become active (usually in the third column).
2. Tap the isolated far-right column to drop the Purple marble, then access the Dark Blue block beneath.
3. Route the remaining Dark Red and Light Green blocks from the bottom left.
4. Only drop marbles when you know a matching Box is active or one clear away.

Tips & tricks

• Always prioritize clearing the three Boxes to break the Panels as quickly as possible.
• Keep the Conveyor Belt empty by avoiding the left column until you have a Pink or Purple Box.
• Watch for the secondary Boxes that appear after the Panels break and use them to clear leftover colors.

Common mistakes

• Tapping the left column early, which floods the Conveyor Belt with Pink and Purple.
• Ignoring the Conveyor Belt pressure and dropping marbles without a plan.
• Failing to clear the three Boxes in order, delaying the Panel break.

Marble Sort Level 607 FAQ

Get the Official Game

⬇ Download Marble Sort

Back to the full Marble Sort level list.